To get the best results from your SH800 be sure to keep your scraper blades sharp while you work – this is an important aspect to be as efficient as possible during the paint removal process. A dull scraper slows your work down considerably.

 

Clean glass before proceeding with paint and putty removal as the SH800 does not require the glass to be shielded but it must be clean of dirt/debris/dust/residue, etc.

 

Be sure to let the unit rest from time to time, allowing the heat to escape (not flat on a surface such as a table or on the ground but with the bulbs reflected outwards) as this is the number one reason folks’ burnout their tools. It is in the manual but often overlooked.

 

Finally, if you have some stubborn dry paint, consider brushing on some Purified Linseed Oil the night before paint removal as this will help reconstitute the old coating for easier removal, as well as to bind the dust for quicker disposal. Usually, the more layers of paint the faster the infrared works.

 

Dampen and dispose of oil-soaked rags to avoid a fire hazard.

 

It is always advisable to wear proper safety gear, including a respirator. Dampen and dispose of debris as directed by your local community waste management location.

 

If you have questions always feel free to reach out: compass1990@gmail.com

All The Silent Paint Remover™ purchases include a standard 1 year quality warranty from the date of purchase according to federal, state and local regulations based on normal use and conditions.

Damage or defect that can be contributed to normal wear and tear, overheating, or incorrect use, are not covered by the warranty.

Read more about proper tool operation for best results on our infrared tool product page.