Linseed oil varnish PRIMER. Le Tonkinois Bio Impression.
To get an even longer life out of your LeTonkinois varnish, Bio Impression penetrates deeper into the wood allowing the Le Tonkinois varnish to adhere even better. Le Tonkinois Bio impression will also work as a stand alone varnish too. Creates a flat surface.
Apply only on clean sanded surfaces. Exterior as well as interior applications. Remove any chemical acrylic, epoxy or polyurethane varnish. Avoid silicone tack cloth or cleaners.
Le Tonkinois Bio Impression Flat Varnish: 2.5 Liter
Clean old or dirty wood if needed with Linseed Oil Soap, rinse well, and allow to dry fully. Some light hand sanding may be required to address raised grain.
Work to avoid dust or other particles getting into the can or onto the wood surface before application. Vacuum and wipe down as needed to get the smoothest finish.
Do not shake the can.
Do not stir or thin the primer. Use as-is straight from the can.
Apply even coats with a brush or clean cloth/pad.
Typically, dry to the touch in 8 hrs with ideal 60+ degree ambient temperatures and with good air circulation.
Let dry at least 8 hours before applying Le Tonkinois Linseed Oil Varnish.
Avoid interactions with silicone – can inhibit adhesion of Linseed Oil Varnish.