Teak cockpit surface cleaned with the organic purified linseed oil soap and preserved with organic boiled linseed oil.

This surface is very durable marine finish. The surface should be maintained on a yearly or on as needed basis. New wood may need two thin coats in the first season as can be seen in the below sequence of photos.

Organic Burified Linseed oil is much longer lasting compared to any marine wood preservative/ varnish available from a marine store today. Organic Linseed oil never causes cracks, peels or traps moisture that can cause the wood to rot.

This is an amazing product replicates what was used 100’s of years ago before any chemical products were invented. It worked then and it works now!

Spray the surface lightly with water. Apply the Organic linseed soap directly onto the surface. Scrub the surface with a stiff decks brush over the entire surface. Rinse with the water hose. No need for power washing. The linseed oil soap in conjunction the scrubbing will remove any gray wood and dirt. Allow the surface to dry. Apply the organic linseed oil, sparingly.

Maintenance: Maintain with purified linseed oil soap (just pour the soap on the surface with a small amount of water. Scrub with a decks brush. Rinse with water).