Painting concrete and stone surfaces had been possible for a long time before specialty petroleum paint was invented. Utilizing the organic linseed oil paint will create a very durable and long lasting surface on any exterior and interior concrete or stone surface.

Directions:

Add 30% water to any of the 30 Allback colors. Use on exterior & Interior concrete surfaces including cement siding stucco, garage floors etc. This may also apply to old stucco that is not a fiberglass coated acrylic stucco used during the last 25 years or so. On new stucco use the organic linseed oil paint without the mixture of water.

Note: Organic linseed oil paint will adhere to any surface that is dry and clean.

Mix paint and water thoroughly. Use paint mixer attached to a drill for great results. When you add water to the organic linseed oil paint it becomes quite thick in consistency. If you are able to mix the paint very well you can add up to 50% water into the organic linseed oil paint. Always start with approximately 30% water.

Apply one coat. Apply with a stiff natural paint brush. You can also spray the paint. This formula for concrete paint is very easy to work with - very little splashing.

Clean up with our organic linseed oil soap.
After 20 -30 years. Clean the surface with the linseed oil soap and apply a coat of paint if needed.